Replacement Parts

Retainer flagpole rings are generally used with internal halyard flagpoles by providing a means of keeping the bottom of the flag close to the pole...

Cast aluminum with stainless steel hinge pins. Design allows for easy installation utilizing the cleat holes to mount the cleat cover box. Comes co...

Our counterweights are fabricated from 2” diameter steel and then coated with plastisol. The 3 1/2” pound weights are supplied with one eyebolt att...

For ground set flagpoles with a top diameter of 2 inches. This flagpole cap is used with poles that are outfitted with a pulley and eyebolt assembl...

Replacement cleats for flagpoles. Available in cast aluminum or die cast in assorted sizes. Below are the most common flagpole cleats. If you do no...

Braided flagpole rope. Designed for outdoor durability. We offer rope with 1/4", 5/16" or 3/8" diameters. Typical uses: 1/4" rope for 2" to 4" dia...

Our wire center halyard rope increases the security and durability of your flagpole rope. Designed for outdoor use, this halyard rope helps with th...

Our aluminum flagpole flash collars provide the finishing touch to the flagpole base. These are designed to be placed at the base of a flagpole to ...

Galvanized Steel Foundation Sleeves in a variety of diameters and lengths. These are designed as the foundation for an in-ground commercial flag po...

This is a replacement ground sleeve for our 20' Sectional Flagpole. You can use this replacement ground sleeve when you need to relocate your flagp...

This replacement metal screw joint fits our indoor oak flagpoles with a diameter of 1.25". If the center screw joint has become tarnished, pitted, ...

Available in gold or silver (satin) finish, spun aluminum flagpole ball top ornaments are constructed from heavy gauge aluminum with a flush seam. ...

These are replacement sections for our 20' Sectional Flagpole. The sections measure approx. 56" in length and are 2" in diameter. Three styles are ...

These are replacement sections for our 18' Sectional White Steel Flagpole. The sections measure approx. 51" in length and are 2" in diameter. Three...

Cast aluminum construction with cast nylon pulley. Designed to slip over the top of a flagpole and secured with stainless steel set screws. The top...

Rotating cap-style flagpole truck assembly. These trucks utilize self-lubricating ball bearing assemblies for ease of rotation, product life and st...

Cast aluminum flagpole truck for external halyard poles with female fitting, threaded type, revolving, single pulley. Revolves with the wind to red...

Our vinyl snap covers are made from durable vinyl material designed for outdoor use. The snap cover measures 3.5" in length and will slide over our...