Accessories, Parts & Lights

Gold or silver colored plastic slip fit acorn finial to fit a 1" or 3/4" diameter flagpole. Can be used as a replacement finial for an outdoor flag...

Retainer flagpole rings are generally used with internal halyard flagpoles by providing a means of keeping the bottom of the flag close to the pole...

It is difficult to display a house or porch American flag at half-staff. An accepted patriotic practice and display of mourning is to attach a blac...

This cast aluminum 3-flag bracket will hold up to 3 flags that are typically 12"x18", including our Hand-Held/Stick U.S. Flags. The bracket is desi...

This cast aluminum 5-flag bracket will hold up to 5 flags that are typically 12"x18", including our Hand-Held/Stick U.S. Flags. The bracket is desi...

This bracket is adjustable to multiple positions for maximum flexibility. Fits any of our 1" diameter poles. The bracket is made from cast aluminum...

This heavy-duty bracket will hold a pole up to a 1" diameter at a 35 degree angle. Made from rust-free aluminum, the bracket features a thumb screw...

Our "classroom" bracket is designed to hold any flag mounted to a staff with a diameter from 3/8" up to 5/8". This bracket is considered the standa...

Our "classroom" bracket is designed to hold any flag mounted to a staff with a diameter from 3/8" up to 1/2". This bracket is considered the standa...

This heavy-duty bracket will hold a 1" diameter flagpole at a 30 degree angle. Made from rust-free and very strong Stainless Steel.

Durable stamped steel brackets will display your flagpole at a 45 degree angle. Available in 3 sizes as shown. You can view our flagpole selection ...

Available in Silver or White (product may vary slightly from image shown). This sturdy cast aluminum bracket will accommodate either a flag or bann...

This strong brass clip is used to hold a flag with grommets or thimbles to a rope on an outdoor flagpole. Use this clip for larger flags or harsh e...

This strong rubber coated 3" brass clip is used to hold a flag to a rope on an outdoor flagpole. Available in white or brown rubber coating, design...

These clips are made from strong polymer plastic and is designed to hold a flag with grommets to rope on an outdoor flagpole. Plastic clips will no...

This item will allow you to attach a flag with grommets to a flagpole. Available in two sizes, these grippers are designed to work with our flagpol...

The Endura indoor stand fits indoor flagpoles with a diameter of 1.25 inches. It is made of a sturdy aluminum and comes in a very attractive gold o...

This Ball Top LED Flagpole Light can replace your existing flagpole ball top. Made from gold colored aluminum, it contains 8 LED lights and include...

For ground set flagpoles with a top diameter of 2 inches. This flagpole cap is used with poles that are outfitted with a pulley and eyebolt assembl...

Replacement cleats for flagpoles. Available in cast aluminum or die cast in assorted sizes. Below are the most common flagpole cleats. If you do no...

Braided flagpole rope. Designed for outdoor durability. We offer rope with 1/4", 5/16" or 3/8" diameters. Typical uses: 1/4" rope for 2" to 4" dia...

Our wire center halyard rope increases the security and durability of your flagpole rope. Designed for outdoor use, this halyard rope helps with th...

Our aluminum flagpole flash collars provide the finishing touch to the flagpole base. These are designed to be placed at the base of a flagpole to ...

Galvanized Steel Foundation Sleeves in a variety of diameters and lengths. These are designed as the foundation for an in-ground commercial flag po...

This slip fit bal top can be used as a new or replacement gold ball top for any 1" diameter Residential Flagpoles. The ball slips right over the en...

This is a replacement ground sleeve for our 20' Sectional Flagpole. You can use this replacement ground sleeve when you need to relocate your flagp...

This plastic sleeve slips onto the pointed ferrule at the bottom of a guidon staff so it stands upright in an indoor stand. The sleeve is 4-1/2 in....

Our Government Spec military guidon stand has a polished finish. This stand is designed to work with our Guidon Poles. Adapter available separatel...

Made of strong, durable polymer plastic. When completely folded this stand measures only 24" x 2-1/8". Color is rich dark brown to compliment any d...

This cast stand creates a display of 1, 2, or 3 flags. Supplied with adapter sleeves to accommodate various pole diameters: 1 Inch, 1-1/8 Inch or 1...

This item is designed for use with any indoor presentation set. The spreader can be used on U.S., Religious, Military, International, State or any ...

This replacement metal screw joint fits our indoor oak flagpoles with a diameter of 1.25". If the center screw joint has become tarnished, pitted, ...

This patented device will help prevent your flag from wrapping around a pole! Everything is included for installation. This product is designed to ...

Available in gold or silver (satin) finish, spun aluminum flagpole ball top ornaments are constructed from heavy gauge aluminum with a flush seam. ...

Add some patriotism to your flagpole. We offer 2 styles of flagpole ornaments. Both eagles are made from cast aluminum for outstanding durability. ...

This bracket accepts flags mounted on staffs that are 5/16 in. or smaller. No tools required. Great for mailboxes and many other applications. Supe...

This replacement gold ball top for our Spinning Flagpoles. The ball has a threaded bottom to screw on to the top of the pole. Plastic material.

This replacement gold eagle top for our Spinning Flagpoles. The eagle has a threaded bottom to screw on to the top of the pole. Plastic material.

This eagle will fit our U.S. flag kits. If your eagle is lost or broken, this will fit any 3/4" diameter flagpole. Wingspan of Approx. 5". NOTE: St...

These are replacement sections for our 20' Sectional Flagpole. The sections measure approx. 56" in length and are 2" in diameter. Three styles are ...

These are replacement sections for our 18' Sectional White Steel Flagpole. The sections measure approx. 51" in length and are 2" in diameter. Three...

These flag mounting rings are designed for flags that utilize grommet attachments. The rings have a rotating anti-wrap feature which allows the fla...

Solar powered flagpole light needs no special tools or wiring. Solar panels collect energy from the sun all day and illuminate your flag at night. ...

Solar powered flagpole light needs no special tools or wiring. Solar panels collect energy from the sun all day and illuminate your flag at night. ...

If You Have A Flagpole, And Want To Illuminate Your Flag, You Will Love This Product! The Titan Solar Light Takes Only A Minute To Add It To Your F...

Designed to work with our Titan Flagpoles. Powder coated aluminum “Wheel Stand”. This is primarily used for RV's or at tailgating events, under the...

Cast aluminum construction with cast nylon pulley. Designed to slip over the top of a flagpole and secured with stainless steel set screws. The top...

Rotating cap-style flagpole truck assembly. These trucks utilize self-lubricating ball bearing assemblies for ease of rotation, product life and st...